Sehr geehrter Besucher,
unser aktuelles Lieferprogramm finden Sie in deutscher Sprache im eShop von KAFTAN media.

Beim Klick auf die Sprache Deutsch werden Sie automatisch weitergeleitet.
Choose Language: Deutsch

You have no items in your shopping cart.

Order No. 701208

PLC-Trainer AC500 - with CPU and programming software

with PLC AC500-eCo from ABB  

Be the first to review this product

Availability: 4 - 6 weeks

€720.00 excl. tax
plus shipping
OR

Quick Overview

Training device with PLC CPU AC500-eCo, Typ PM564 from ABB. Including programming software and cable. The ideal training concept getting into programming ABB PLCs with CoDeSys at a good value.

PLC-Trainer AC500 - with CPU and programming software

More Views

Details

The training device PLC-Trainer AC500 is built on a stable aluminum angle. For signal input are integrated 6 toggle switches (on - off - momentary on) as well as two potentiometers for analog value input 0-10 V/DC 10 mA (e.g. simulation setpoint vs. actual temperature values). The signal input is indicated by six LEDs (5 mm).
Learning Cards can be put on the board's field "Learning Cards" and used there. The Learning Cards show depending on the practical example, the interconnection between sensors (e.g. toggle switch) and actuators (e.g. LED), which is controlled by the CPU. The 45 included exercises are based on the principle "From easy to demanding" and are printed on 45 laminated Learning Cards. You can easily replace them on the board as required. You can store the learning cards in the included transparent box. Furthermore it is possible to put Plug-On Modules - e.g. Motor, Traffic Lights (available as accessories) - on the 24-pin interface connector. The integrated 24-pin interface connector allows to connect simulation models via a ribbon cable (available as accessories) - max. 6 in-/outputs. With the slide switch "Infrared Receiver" one input is switched to IR receiving. The slide switch "Frequency" turns  on a frequency generator with an adjustable frequency from 50 Hz to 5 kHz. Also a "Horn" can be activated.

Technical Data:
Operating voltage: 24 V DC / 850 mA
2 Potentiometers for analog value input 0...10 V DC / 10 mA
1 Potentiometer for frequency simulation (frequency generator up to 5 kHz)
1 IR receiver
6 Toggle switches for signal input
6 LED status indication - 5 mm, red
1 Slide switch frequency simulation
1 Slide switch horn
1 Terminal for signal board analog output
1 Interface connector 24-pin for Plug-On Modules or simulation models
 
Dimensions (LxWxH): 330 x 170 x 125 mm
Weight: approx.1.7 kg
CE-certificate

Scope of Supply:
1 PLC-Trainer AC500 with PLC CPU (AC500-eCo, type PM564 from ABB)
1 Programming software PS501 for AC500-series on USB stick
1 Programming cable TK503 for AC500-series, D-Sub/USB, length 3 m
1 Power supply international 230 V AC / 24 V DC
1 IR remote control (without batteries)
45 Learning Cards 110 x 81 mm laminated, in transparent storage box
45 practical exercises and solutions (English) in CoDeSys 2.3 on USB stick


Only for use in education an training:
The use of the PLC trainer with CPU, programming software and programming cable from ABB is only permitted for non-commercial education and training at schools, universities and officially recognized educational institutions. The use in industry and handicrafts during initial training is also permitted. You will receive a license agreement for signature when ordering the item.